Entwicklungsumgebung/Dateiliste/inittab
Diese Seite sollte nochmals überarbeitet werden. Eine Begründung befindet sich in der Regel unter Diskussion (oben). |
/etc/inittab
Achtung: Bitte achten Sie unbedingt darauf, beim Kopieren und Einfügen einen Editor mit UNIX-Zeilenumbrüchen zu verwenden!
Hinweis: Die im delixs-Schulserver geänderten Zeilen sind gelb unterlegt.
<source highlight="33" lang="text">
- /etc/inittab: init(8) configuration.
- $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
- The default runlevel.
id:2:initdefault:
- Boot-time system configuration/initialization script.
- This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
- What to do in single-user mode.
~~:S:wait:/sbin/sulogin
- /etc/init.d executes the S and K scripts upon change
- of runlevel.
- Runlevel 0 is halt.
- Runlevel 1 is single-user.
- Runlevels 2-5 are multi-user.
- Runlevel 6 is reboot.
l0:0:wait:/etc/init.d/rc 0 l1:1:wait:/etc/init.d/rc 1 l2:2:wait:/etc/init.d/rc 2 l3:3:wait:/etc/init.d/rc 3 l4:4:wait:/etc/init.d/rc 4 l5:5:wait:/etc/init.d/rc 5 l6:6:wait:/etc/init.d/rc 6
- Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin
- What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -h now
- Action on special keypress (ALT-UpArrow).
- kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
- What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start pn::powerfailnow:/etc/init.d/powerfail now po::powerokwait:/etc/init.d/powerfail stop
- /sbin/getty invocations for the runlevels.
- The "id" field MUST be the same as the last
- characters of the device (after "tty").
- Format:
- <id>:<runlevels>:<action>:<process>
- Note that on most Debian systems tty7 is used by the X Window System,
- so if you want to add more getty's go ahead but skip tty7 if you run X.
1:2345:respawn:/sbin/getty 38400 tty1 2:23:respawn:/sbin/getty 38400 tty2 3:23:respawn:/sbin/getty 38400 tty3 4:23:respawn:/sbin/getty 38400 tty4 5:23:respawn:/sbin/getty 38400 tty5 6:23:respawn:/sbin/getty 38400 tty6
- Example how to put a getty on a serial line (for a terminal)
- T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
- T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
- Example how to put a getty on a modem line.
- T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
</source>